Used Car Inspection Checklist: What to Check Before You Buy

By Chris, owner and inspector · October 23, 2026

A good used car inspection checklist covers the paperwork, a cold start, the exterior and underside, the engine bay, the interior, a test drive and a computer scan. You can do most of it yourself; the scan and the underside are where a mechanic earns the fee.

Before you go

  • Get the VIN and run a history report.
  • Ask to see the title. Is it in the seller's name? Is it clean, or branded (salvage, rebuilt, flood)?
  • Ask for service records.
  • Ask the seller not to start the car before you arrive. A cold engine shows problems a warm one hides.

Cold start

  • Every warning light should come on with the key and then go out.
  • Listen for knocking, ticking or a long crank before it fires.
  • Watch the exhaust: blue smoke means oil, thick white smoke that doesn't clear can mean coolant.

Outside and underneath

  • Panel gaps that are uneven side to side, and paint that doesn't quite match: signs of accident repair.
  • Overspray on rubber seals, trim or under the hood.
  • Tire wear: uneven wear points at alignment or suspension problems. Check the date code; old tires need replacing whatever the tread says.
  • Rust on the frame, brake lines and rocker panels. Surface rust is normal in Missouri; flaking or holes are not.
  • Fresh fluid drips under the car.

Under the hood

  • Oil on the dipstick: milky or foamy oil is a serious warning.
  • Coolant level and color.
  • Belts and hoses: cracks, glazing, soft or swollen hoses.
  • Signs of a recent engine bay wash on an older car. Sometimes that's pride; sometimes it's hiding a leak.

Inside

  • A musty or heavy air-freshener smell, damp carpet, or silt under the mats: possible flood damage.
  • Wear on the pedals, seat and steering wheel that doesn't match the mileage.
  • Every window, lock, seat adjuster, the A/C and the heat.

Test drive

  • Smooth shifts with no slipping, flaring or harsh clunks.
  • Straight tracking with your hands light on the wheel.
  • Braking without pulling, pulsing or grinding.
  • Clunks over bumps and noises in turns.

What you can't check from the curb

Two things on this list need tools. First, a scan of every computer module, not just the engine. Codes can be cleared right before a sale, and a scanner shows whether the car's self-tests have finished since, which is often the giveaway. Second, a proper look underneath for frame damage, leaks and repairs you can't see standing up.

That's what an OTRAM inspection adds: 74 points, a full module scan, and a written PDF report with photos the same day, from $175. Book an inspection or see what the report looks like.

Common questions

What should I check when buying a used car?
The title and history, a cold start, panel gaps and paint, rust and leaks underneath, the oil and coolant, flood signs inside, and a test drive covering shifting, steering and brakes. Then get a computer scan of every module.
Can I inspect a used car myself?
You can do most of the visual checks and the test drive yourself. A mechanic adds the full computer scan, a proper look underneath, and the experience to know what a finding means and what it'll cost.
How long does a pre-purchase inspection take?
About 45 minutes for a standard car, 60 for an SUV, truck or minivan, and 75 for luxury, performance, diesel and electric vehicles.

Related