Hyundai Engine Problems: What to Check Before You Buy a Used Hyundai

By Chris, owner and inspector · October 24, 2026

The biggest Hyundai engine problem is connecting rod bearing wear in the 2.0L and 2.4L Theta II engines, which led to recalls on 2011 to 2014 Sonatas and 2013 to 2014 Santa Fe Sports. Before you buy one, check the recall and the knock-sensor software update with a Hyundai dealer. OTRAM inspects used Hyundais in St. Louis from $175.

The Theta II engine recalls

  • 2011 and 2012 Sonata with the 2.0L or 2.4L direct-injection engine, built in Alabama: metal debris from manufacturing could restrict oil flow to the connecting rod bearings. Dealers inspect and replace the engine if needed (NHTSA campaign 15V-568).
  • 2013 and 2014 Sonata and Santa Fe Sport: machining errors may cause premature bearing wear. Dealers inspect and replace the short block if needed (17V-226).

Enter the VIN at NHTSA's recall lookup to see whether the recall has been done.

The lifetime engine coverage

A 2019 class-action settlement covered a wider group of Theta II engines, including 2011 to 2019 Sonata, 2013 to 2018 Santa Fe Sport, 2019 Santa Fe, and 2014, 2015, 2018 and 2019 Tucson. Under it, the car gets a free Knock Sensor Detection System software update, and once that's done, short-block repairs for connecting rod bearing damage are covered for life, for the original and later owners.

That coverage is valuable, so ask a Hyundai dealer to check the VIN: whether the software update was done, and whether the engine has already been replaced.

Signs of a failing Theta II engine

  • A knock from the engine that gets faster as the revs rise.
  • Low oil on the dipstick or an oil pressure light.
  • A flashing check engine light, stalling or a sudden loss of power.
  • A seller who won't let the car idle cold, or who has just changed the oil to quiet it down.

What an inspection checks on a Hyundai

  • A cold start and a listen for rod knock, then the same warm.
  • A full scan for stored and pending codes, including knock and misfire codes.
  • Oil level, condition and any sign of metal or sludge.
  • The usual checks: transmission, suspension, brakes, tires and leaks.

Book a used Hyundai inspection

A Sonata or Elantra is a $175 Standard inspection; a Santa Fe, Tucson or Palisade is $230; N models and the Ioniq electric cars are $290. Anywhere in the St. Louis metro, with the written PDF report the same day. Book an inspection. Buying from out of state? See how out-of-state buyers use OTRAM.

Common questions

Which Hyundai engines have problems?
The 2.0L and 2.4L Theta II engines. Hyundai recalled 2011 to 2014 Sonatas and 2013 to 2014 Santa Fe Sports for connecting rod bearing wear, and a 2019 settlement added lifetime short-block coverage on more models after a knock-sensor software update.
Does Hyundai have a lifetime engine warranty?
Only for certain Theta II engines covered by the 2019 settlement, and only for short-block repairs from connecting rod bearing damage once the Knock Sensor Detection System update is done. A Hyundai dealer can check the VIN.
How much is an inspection on a used Hyundai?
$175 for a Sonata or Elantra, $230 for a Santa Fe, Tucson or Palisade, and $290 for N models and Ioniq electric cars.

Related