The Theta II engine recall
Kia recalled certain 2011 to 2014 Optima, 2012 to 2014 Sorento and 2011 to 2013 Sportage models because machining errors during engine manufacturing may cause premature bearing wear. Dealers inspect the engine and replace it if needed, free (NHTSA campaign 17V-224).
Enter the VIN at NHTSA's recall lookup to see whether the recall has been done.
The lifetime engine coverage
A 2019 class-action settlement covered Theta II engines in a wider range of Kias, reported as 2011 to 2019 Optima, Sorento and Sportage. Under it, the car gets a free Knock Sensor Detection System software update, and once that's done, short-block repairs for connecting rod bearing damage are covered for life, for the original and later owners.
Eligibility is set by the VIN, so ask a Kia dealer to check the car: whether the software update was done, and whether the engine has already been replaced.
Signs of a failing Theta II engine
- A knock from the engine that gets faster as the revs rise.
- Low oil on the dipstick or an oil pressure light.
- A flashing check engine light, stalling or a sudden loss of power.
- A seller who won't let the car idle cold, or who has just changed the oil to quiet it down.
What an inspection checks on a Kia
- A cold start and a listen for rod knock, then the same warm.
- A full scan for stored and pending codes, including knock and misfire codes.
- Oil level, condition and any sign of metal or sludge.
- The usual checks: transmission, suspension, brakes, tires and leaks.
Book a used Kia inspection
An Optima, K5 or Forte is a $175 Standard inspection; a Sorento, Sportage or Telluride is $230; the EV6 and EV9 are $290. Anywhere in the St. Louis metro, with the written PDF report the same day. Book an inspection. Buying from out of state? See how out-of-state buyers use OTRAM.
